Detect And Avoid Lead at Joby Aviation, Concord, CA

Detect And Avoid Lead at Joby Aviation in Concord, CA. Full-time. $164,900 to $245,000 a year. Apply with swipeandhired.

Job Locations

US-CA-Concord | US-CA-Santa Cruz

ID

2026-5144

Category

Engineering - Aircraft Design, Systems & Testing

Type

Regular Full-Time

Company Overview

Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. At Joby, we've been working to make that dream a reality since 2009 and we're now in the final stages of certifying our aircraft with the FAA. With plans to launch our aircraft in the US and Dubai, we're now scaling manufacturing and preparing for the launch of our commercial service.

Overview

We're building autonomous aircraft, and safely sharing the airspace is non-negotiable. Detect and Avoid (DAA) is how our aircraft sense other traffic — cooperative and non-cooperative — and maneuver to stay well clear and avoid collisions without a pilot in the loop.
This is not a single solution for a single aircraft. We operate multiple aircraft types with different missions and performance envelopes, and they won't all solve DAA the same way: some will carry DAA onboard, some will rely on ground-based DAA, and some will use a mix of both. A core enabler across the portfolio is a radar we are designing and building in-house, developed by our dedicated radar team.
As the DAA Lead, you own the DAA capability across that portfolio — from architecture and sensor strategy, through requirements and certification basis, to the roadmap that gets it flying. You are also the product voice into the radar program, defining what the radar must detect, at what performance, and how we'll prove it. You sit at the intersection of the radar team, autonomy/GNC, systems engineering, safety, flight test, and regulators, and you're accountable for turning a hard technical and regulatory problem into a shipped, certifiable product.

Responsibilities

• Own DAA as a portfolio, not a point solution — define a coherent strategy across multiple aircraft types with different missions, performance envelopes, and operating environments, rather than a single design for a single platform.
• Architect across onboard, ground-based, and hybrid DAA — determine which aircraft carry the sensing and avoidance function onboard, which rely on ground-based surveillance and a remote/automated
• Drive commonality and reuse where it pays off — define shared requirements, interfaces, and a common DAA core (tracking, threat assessment, well-clear logic) that deploys across platforms and architectures, while allowing each aircraft to diverge where its mission demands.
• Set per-architecture certification and safety strategies — recognize that onboard, ground-based, and mixed DAA carry different means of compliance, failure modes, and safety arguments, and own a means-of-compliance approach for each.
• Own the DAA product vision and roadmap — define what we build, in what order, and why, balancing safety, certification timeline, cost, and aircraft performance.
• Drive radar requirements across deployment modes — translate DAA-level needs (detection range, field of regard, update rate, track accuracy, target RCS, false-alarm/missed-detection budgets) into clear, testable requirements for the in-house radar team, covering both airborne installations and ground-based surveillance roles, and own those requirements as they evolve.
• Partner closely with the radar team on test and validation — define the radar's acceptance criteria, shape ground and flight test campaigns, encounter geometries, and target sets, and adjudicate performance against DAA needs.
• Lead the broader DAA technical strategy across the full sensing stack (radar plus ADS-B, transponders, EO/IR, acoustic, and fusion) and the avoidance logic (tracking, threat assessment, well-clear definition, maneuver guidance).
• Translate regulatory and standards requirements into engineering requirements — work fluently against frameworks like RTCA DO-365 / DO-366, ASTM F3442 / F3322, SC-228, and the relevant FAA/EASA certification basis for each aircraft class.
• Be the cross-functional connective tissue between the radar team, perception, GNC, systems engineering, safety/SSA, flight test, and regulatory affairs.
• Define and prioritize the backlog — write clear requirements and acceptance criteria, manage trade-offs, and make the call on scope when reality pushes back.
• Drive verification & validation — own how we prove the system works across architectures: simulation, encounter modeling, Monte Carlo / fast-time analysis, HITL, and flight test.
• Engage directly with regulators and standards bodies to build and defend the means of compliance.
• Manage risk — maintain the DAA hazard picture for each platform and feed it into the aircraft-level safety case.

Required

• 7+ years in aerospace, autonomy, robotics, sensors, or a closely related field, with significant ownership of a complex safety-critical system.

• Bachelor's Degree or advanced degree in related field.
• Deep, hands-on understanding of detect-and-avoid / sense-and-avoid: sensors, tracking and sensor fusion, collision avoidance logic, and the "well clear" concept.

• Experience reasoning across different system architectures (e.g., onboard vs. ground-based vs. distributed) and making principled trade-offs between them.

• Ability to specify and evaluate a radar (or comparable sensor) as a product owner — you can reason about detection performance, RCS, clutter, false-alarm rates, and what it takes to test those claims, and hold a hardware team to clear requirements.

• Demonstrated ability to lead across disciplines and own a capability end to end — not just contribute to it.

• Working knowledge of airspace operations, separation/right-of-way rules, and the relevant DAA standards (DO-365, ASTM F3442, etc.).

• Strong systems-engineering instincts: requirements, interfaces, V&V, and trade studies.

• Excellent written and verbal communication — you can brief executives, write a requirement, and defend an argument to the FAA in the same week.

This position must meet US export control compliance requirements, therefore a candidate must qualify as a “US Person” as defined by 22 C.F.R. § 120.15. “US Person” includes US Citizens, lawful permanent residents, refugees, or asylees.

Desired

• Direct experience defining requirements for, integrating, or testing radar systems for aircraft or autonomous vehicles.
• Experience with ground-based surveillance, ATC/UTM, or distributed sensing architectures.
• Experience taking an aircraft system through a certification or approval process (Part 23/25, UAS, or BVLOS waivers/exemptions).
• Background in perception or GNC for aircraft or autonomous vehicles.
• Familiarity with encounter modeling and risk-ratio / safety-metric analysis (e.g., ACAS X evaluation frameworks).
• Prior product owner / product management experience in a hardware + software environment.
• Flight test experience.

Compensation at Joby is a combination of base pay and Restricted Stock Units (RSUs). The target base pay for this position is $164,900 - $245,000/yr. The compensation package will be determined by job-related knowledge, skills, and experience.

Joby also offers a comprehensive benefits package, including paid time off, healthcare benefits, a 401(k) plan with a company match, an employee stock purchase plan (ESPP), short-term and long-term disability coverage, life insurance, and more.

Additional Information

Joby Aviation is an equal opportunity employer.